Home Team Electric has installed and serviced home wiring across the Coachella Valley and Morongo Basin since 2006, with over 25,000 completed residential projects.
The Short Answer
Not every wiring concern calls for a full rewire. Some require a targeted repair at a specific connection point. Others require replacing the conductors on a single circuit. And some need an evaluation to determine exactly what's there before any decision gets made. The evaluation tells you which situation you're dealing with, what it means, and what it takes to address it.
Last verified: August 2026
Book a Service Call
An electrician evaluates your home's wiring, tells you exactly what's safe and what isn't, and explains your options in plain terms. Same-day visits. Book the $99 service call and get a straight answer.
Know the Signs
Old wiring rarely fails all at once. It gives you signals first. If you notice any of these in your home, it's worth having an electrician open things up and check the true condition of what's behind your walls.
An outlet or switch plate that feels warm to the touch, or shows brown scorching around the screws, is one of the clearest warnings here. Heat at the device means resistance in the connection, and resistance means current is being turned into heat instead of moving cleanly through the wire. That's how a wall fire starts, slowly and out of sight. Warm to the touch is the signal to stop using the circuit and have it checked.
Ungrounded two-prong outlets tell you the wiring predates modern grounding. Without a ground path, a fault has nowhere safe to go, which puts you and your electronics at risk. Most of these homes also lack the AFCI (fire prevention) and GFCI (shock prevention) protection that current California Electrical Code requires. Swapping in three-prong covers doesn't add a ground. It just hides that one was never there.
Older homes were wired with cloth or early rubber insulation instead of modern plastic. After decades in a hot attic or a desert wall cavity, that insulation dries out, cracks, and crumbles off the copper. Bare conductors near framing and fixtures are a fire risk that grows every year. If an electrician has ever mentioned cloth wiring or you've seen frayed jacket near a fixture, the system is aging out of safe service.
Homes from the mid-1960s to late 1970s were often wired with aluminum branch circuits. Aluminum expands, contracts, and oxidizes differently than copper, which loosens connections and builds heat at outlets and switches over time. The CPSC and home insurers have flagged it for years as a known fire concern. It isn't an emergency tonight, but it needs a planned, code-correct remediation rather than a patch.
If your home was built in the early 20th century and never fully rewired, it may still run on knob-and-tube. This wiring has no ground, can't safely handle modern loads, and becomes dangerous when buried under insulation, which traps the heat it was designed to shed in open air. Many insurers won't cover a home that still has it active. Knob-and-tube is a replacement, not a repair.
Lights that flicker or dim on their own, outlets that work intermittently or have gone dead, and switches that spark when you flip them all point to loose or failing connections in the wiring. A single bad outlet can be a simple fix. The same symptom repeating across multiple rooms usually means the branch wiring itself is degrading. It's the system telling you the connections it has relied on for decades are starting to let go.
When an insurer, a buyer's inspector, or an appraiser calls out your wiring, it's because aluminum, knob-and-tube, or ungrounded circuits carry documented, repeatable risk. They see thousands of homes, so a consistent flag reflects a consistent pattern. Ignoring it doesn't change the condition and can affect your coverage, your claims, and your home's value. A flagged system calls for a rewiring plan, not a workaround.
Frank's Translation
Power leaves the panel and travels through branch wiring inside your walls, ceilings, and floors to reach every outlet, switch, light, and appliance in the home. You never see it, but it's the path everything depends on, and it's carrying loads today that it may never have been built to handle.
If the panel is the heart, the wiring is the nervous system. It's the network that carries power, and safety, to every corner of the home.
Modern wiring does two jobs at once. It delivers power where you need it, and through grounding and protection it gives a fault a safe path to ground instead of through you or into the framing.
When that wiring ages out, it doesn't stop working all at once. It just stops protecting. Insulation breaks down, connections loosen, and the safety margin the home was built with quietly disappears behind the drywall.
Warm outlets, flickering lights, breakers that trip for no clear reason. Those symptoms aren't the problem. They're the wiring telling you the problem is behind the wall.
The Real Question
Not all wiring is the same, and the type in your home largely decides whether it's safe for the way you live now. A house built before modern grounding was wired for a fraction of today's electrical demand: no central AC running all summer, no electronics in every room, no EV charger in the garage. The wiring didn't get weaker because you added load. It was simply never built to carry it, and in the desert heat the aging only moves faster. A rewire is how the home gets the safe, grounded, code-current wiring it needs today and for the next several decades.
Across the homes we service, wiring falls into three broad families. Find where yours sits.
Oldest homes
Knob & Tube
PRE-1950
Replacement, not repair
Early-century wiring with no ground path and no capacity for modern loads. It becomes hazardous once buried under attic insulation, and many insurers won't cover a home that still has it active. This wiring gets fully replaced, not patched.
Mid-century homes
Aluminum
1965-1979
A known fire concern
Common in homes wired from the mid-1960s to late 1970s. Aluminum loosens and heats at connections as it ages, a pattern the CPSC and insurers have flagged for years. It calls for a planned, code-correct remediation rather than another quick fix at the outlet.
Current standard
Copper
MODERN
What today's code expects
Modern copper branch wiring (NM-B) with a full ground and the AFCI (fire prevention) and GFCI (shock prevention) protection current California Electrical Code requires. This is the standard a rewire brings your home up to, sized and protected for how a household actually lives now.
MIXED
PARTIAL
Many desert homes are a mix: a kitchen or addition rewired at some point while the original branch circuits stay hidden in the rest of the house. A partial rewire can be the right call, but only after an evaluation maps what's actually behind the walls. It isn't about the age on the deed. It's about what's truly running power today.
No Guesswork
You can't tell what's behind the drywall from the outlet covers, so we don't guess. An electrician inspects accessible wiring, the panel, junctions, and grounding, then tells you straight whether you're looking at targeted repairs, a partial rewire, or a whole-home rewire. We evaluate first, then give you a clear plan and an honest answer.
Choose Your Coverage
Every rewire we do gets the same foundation: grounded, code-current copper wiring with AFCI (fire prevention) and GFCI (shock prevention) protection. The three tiers differ in one thing: how long we stand behind the work, and how much maintenance comes with it.
Workmanship parts and labor
Backed by Home Team Electric
Backed entirely by Home Team Electric, ours, not the manufacturer's. If covered wiring or a device we installed fails from a defect or workmanship issue during the coverage window, we repair or replace it at no charge.
1 annual maintenance visit in the first year.
Extended parts and labor
Backed by Home Team Electric
Stretches the same Home Team Electric coverage across a longer window. A covered defect or workmanship issue stays on us well past the standard term, with no manufacturer middleman to chase.
2 annual maintenance visits over the first years of coverage.
Lifetime Workmanship Guarantee
Backed by Home Team Electric
Backed by Home Team Electric. No expiration. A covered defect or workmanship issue stays our responsibility, and the coverage stays with the home.
3 annual maintenance visits in the early years of ownership.
The visits aren't a sales add-on. They're how the guarantee stays valid.
Coverage applies to our wiring and devices under normal operating conditions with proper maintenance. It doesn't cover damage from skipped maintenance, unapproved third-party work, or conditions that routine annual service would have caught first. That's why each tier includes its own maintenance program.
The Difference Most Miss
The coverage on your rewire belongs to the home, so it goes to the next owner along with the house. There's nothing to file and no window to meet. The rewire coverage and the Lifetime Workmanship Guarantee stay with the home together.
Start to Finish
A whole-home rewire comes with permits, a city inspection, utility coordination, and the work of opening and restoring walls. That sounds like a lot to live through. The good news is you don't manage any of it. We do, and we do it in a way that keeps your home livable while we work.
Required, Not Optional
A rewire is a permitted job in every jurisdiction across the Coachella Valley and Morongo Basin.
Every permit requires a licensed contractor, a documented installation, and a city inspection before the work is signed off. That inspection confirms the new wiring meets California Electrical Code and current NEC standards, including the required AFCI (fire prevention) and GFCI (shock prevention) protection. Skipping the permit only moves the problem to the worst possible time: a home sale, an insurance claim, a future emergency. We pull the permit and schedule the inspection on every rewire.
We Coordinate It
A rewire often needs the utility to de-energize and re-energize service so we can work safely at the panel and feeders.
We coordinate directly with the utility for any disconnect and reconnect, and we line it up with the inspection so the timing actually works and your power is down for as little time as possible. You don't call the utility, you don't schedule the shutoff, and you don't chase the reconnect. That whole back-and-forth is ours, not yours.
Handled By Our Team
The drywall openings we make, the permit, the inspection sign-off, and the records that prove the work was done right are all handled in one place.
We open walls cleanly, fish the new wiring, and leave every opening patch-ready, with the full scope documented from start to finish. So when an inspector, an insurer, an appraiser, or a future buyer asks, the paper trail is already there. A home that's rewired, permitted, inspected, and documented is the version that holds up at sale and at claim time. That's the version we hand you.
Keeps the Guarantee Valid
The rewire is the start. The ongoing care is what keeps the system safe and the workmanship guarantee intact. Here's exactly what we check, every visit.
Every visit is performed by an electrician and documented on a signed checklist, to NEC and Home Team Electric standards. Nothing is taken on faith. It's written down.
The permits, the inspection, the utility, the wall work, the documentation, and the yearly care. You don't manage any of it. Book the $99 service call and we'll handle the whole job from here.
What homeowners across the Coachella Valley and Morongo Basin say about Home Team Electric.
“Zach was professor, thorough and very pleasant. He knows his business. We will have him back to do more work.”
“You won’t be disappointed dealing with home team. Carlos, David, Oscar, Brett, Angel came out and did the entire house in one day. They worked hard and in the end it was definitely worth it as the house’s electricity is working top-notch right now and the lights are brighter. I...”Read the full review
“Josh inspected my electrical system. He was very thorough and patient as he went through everything, very pleasant and friendly. He left me with an understanding of what I need and what my options are. I’m very satisfied with his service and professionalism.”
“Their Awesome ,The very Best, Great we couldn’t be happier with the service and your ELECTRICIANS Angel D. and Angel B. They installed a portable generator backup system for our home .”
“Carlos was great. We loved working with him!”
“We were looking into the possibility of installing a generator. Mike was knowledgeable and was able to explain what the process involved, as we have solar and a back-up battery.”
“There were a few electrical items in our home that weren't working right and Josh did a great job diagnosing and making all the repairs. One issue was a little complicated and he was relentless in solving the problem. We're really happy with everything. Josh is a real pro and...”Read the full review
“Barrett was very personable and professional in servicing our home and pointed out some issues we were not aware of.”
“My Electrician was "BARRETT" He was a very professional person, friendly, and curtitious, he was very knowledgeable in his expertise as a Electrician, plus teaching me about my appliances, and washer & dryer. He found an issue with SCE, and because of him, they came a fixed my...”Read the full review
“Fast professional service. Honest price.”
Homeowners Served
See what homeowners across the Coachella Valley and Morongo Basin are saying about our work.
Read All ReviewsOur Process
No surprises. Every job follows the same steps, since 2006.
Wiring calls are scheduled by urgency. If there is an active electrical problem, same-day service available. If you want a wiring evaluation ahead of a renovation, home purchase, or planned upgrade, we book a time that works for you.
Every call starts with a visual evaluation of the circuits involved and inspection of the main panel or sub-panel feeding them. This happens automatically for three reasons: to confirm it is safe to work on, to match recommendations to the system as it stands, and to protect our workmanship guarantee.
A deeper assessment of your home's overall electrical condition is included at no additional cost and offered without pressure. You decide whether you would like it performed. Work proceeds either way based on the baseline evaluation already completed.
The electrician explains what was found. If wiring is in good condition, you will hear that. If circuits need attention, the electrician names them specifically and explains why. If a full rewire is the right conversation, the electrician walks through the work involved, the permit process, and your options.
You get the price before any work begins, with no surprises. Our $99 service fee covers evaluation time, your options, and guaranteed pricing, and every decision about what happens next belongs to you. For after-hours emergencies dispatched at night or on weekends, the fee is $289.
Our Process
5 Simple Steps
Pro tip: Most home wiring and rewiring projects are completed in a single visit. For larger jobs, you get a realistic timeline during the evaluation, before anything is scheduled.
Related Services
We handle all your electrical needs with the same quality and care. Every service backed by our 100% Satisfaction Guarantee and Lifetime Workmanship Guarantee.
.jpg&w=2560&q=75&dpl=dpl_B7Aj64aoUgM1AfS6oazcrHJvRMTh)
Dependable
Problems don't care what time it is. Home Team Electric has been there for the Coachella Valley and Morongo Basin families since 2006, and we stand behind every job we do. Financing available on approved credit so you can get the work done when you need it.
Get In Touch
Serving the Coachella Valley and Morongo Basin since 2006. Same-day service, and after-hours emergency service at $289. Real people answer the phone. • 72091 Woburn Ct Ste A, Thousand Palms, CA 92276 • 760-248-8709 • info@hometeamelectric.com
Common questions about home wiring and rewiring
It changes the evaluation from the start. Coachella Valley summers regularly climb past 115 degrees, and Morongo Basin day-to-night swings can exceed 40 degrees, cycling expansion and contraction through every connection. So symptoms get read against the home's age, construction era, and load history, not just the breaker that tripped.
Two guarantees with proof behind them. The 100% Satisfaction Guarantee means if the work does not meet your expectations, we make it right. The Lifetime Workmanship Guarantee means we fix workmanship failures at no charge, and the coverage stays with the home if you sell it. Behind both: California C-10 Electrical Contractor License #879507 and a $1,000,000 per-occurrence liability policy.
Because residential electrical work is a specialty, not a side category. Most contractors split time between construction, commercial buildings, and residential calls. Home Team Electric chose one focus in 2006: the electrical systems inside homes across the Coachella Valley and Morongo Basin. Decades inside thousands of desert homes builds pattern recognition no generalist schedule can produce.
Home Team Electric is a residential-only electrical contractor serving the Coachella Valley and Morongo Basin since 2006. The person at your door is a Home Team Electric electrician: drug tested, background checked, and professionally trained, with weekly ongoing training. The company has completed more than 25,000 residential projects, with a 4.9 Google rating and 16,000+ homeowners served.
Yes. Code requires GFCI (shock prevention) protection for pool and spa equipment, nearby receptacles, and underwater lighting, and the requirement exists because water and electricity meet here on purpose. Many desert pools predate today's requirements and run unprotected. If you do not know whether yours is protected, that is exactly what the evaluation answers.
Rewiring is warranted when the wiring itself, not just a device, has aged past safety: brittle or damaged insulation, ungrounded two-wire circuits, aluminum branch wiring, or repeated faults across different circuits. Desert attics bake wiring insulation for decades. An evaluation maps which circuits actually need work, because most older homes need targeted rewiring, not a whole-home gut.
A whole-home surge protector at the panel clamps voltage spikes before they reach your circuits, protecting everything plugged in: AC systems, appliances, EV chargers, and electronics. In the desert, monsoon lightning, grid switching, and your own large motors all generate surges. Plug strips alone protect single devices. The panel unit protects the home.
A brief dim when a large motor starts can be normal, because compressors pull a surge of current on startup. Regular, noticeable flickering across multiple rooms is not. It usually means the panel or service is near its limit, or a connection has loosened under desert heat. The pattern decides which, and the pattern is worth reading professionally.
Our team is ready to answer your questions about electrical services.
